The CNC xPRO controller stepper motor driver is also referred to as an all-in-one controller equipped with all the essential features. For someone who is one the lookout for a versatile stepper motor, the CNC xPRO v4 controller stepper driver is an ideal choice.
Being equipped with the revolutionary v4 technology, this stepper driver motor can monitor the status of each driver looking for any error or fault.
What’s more, the CNC xPRO v4 controller stepper driver comes with a pre-loaded stable version of GRBL. It is capable of powering from ATX PSU and even comes with a laptop power supply. So let’s take a detailed glance at the various features of the CNC xPRO v4 controller stepper driver motor.
Table of Contents
Easy to Install
One of the primary advantages of using the CNC xPRO v4 controller stepper driver is that it takes less than 5 minutes of installation time. It relies heavily on the plug and play motor headers with power supplies and limit switches. Moreover, it also features the GRBL technology which automates various functions in a precise manner.
Note that one driver in the CNC xPRO v4 controller stepper is capable of cloning X, Y and Z. Furthermore, you can quickly connect to the stepper motors and limit switches. It is so because this unit comes with 3.5mm screw terminals.
Specifics of the CNC xPRO v4 controller stepper driver
Here is the list of some of the specifics of the CNC xPRO v4 controller stepper driver.
- It features an easy-to-expand ecosystem
- It takes less than 5 minutes to set up the whole system
- You get more power options to avoid wiring the mains power
- Interestingly, you have the ability to smartly monitor the driver state and failure responses
- It has support for 0 to 10V spindle, VFDs and lasers
- The CNC xPRO v4 controller stepper driver is above all reliable
Official cases with cooling features
This is perhaps one of the most striking features of the CNC xPRO v4 controller stepper driver. In other stepper driver motors, heating issues are quite common. There are instances where professionals have to install separate cooling towers to ensure that optimum temperature is maintained.
But that is not the case with the CNC xPRO v4 controller stepper driver motor. Another highlighting feature of this stepper motor is that it has separate mounting holes on the base line up. It also has a separate V-slot facing.
Smarter monitoring of the driver state and failure responses makes the CNC xPRO v4 controller stepper driver highly popular. In other stepper motors, you have to sit through the full duration until the task has been achieved. But that is not the case with this stepper motor.
The intelligent driver minder feature ensures to save your precious work from several types of faults. In case a fault occurs, your selected options would be executed instantly. The options are:
- Pause – This initiates a system pause which in turn allows you to safely troubleshoot and save your workpiece
- Play – Lets you continue with your work as if nothing has happened
- Pause – This feature initiates a system pause which allows you to safely troubleshoot and save your workpiece
Note that all these selections can be made through the slide switch.
Reliability with greater efficiency
The main reason for the popularity of the CNC xPRO v4 controller stepper driver is its immense efficiency along with great reliability. The system features a 4-layer board which allows the usage of separate motor power and logic power. Also note that all driving signals are isolated in a digital manner.
Moreover, the back-EMF would never touch the power rails of the processor. On the other hand, the system has intelligent and integrated logic and filtering based on the limit switches. Another highlighting feature of the CNC xPRO v4 controller stepper driver is that it comes with a replaceable fuse which is available all over the world.
So there are no more tensions of overloading and circuit tripping. Also, it has a solder free setting. Suppose you want to clone Z-axis instead of Y-axis, you have to simply slide a switch. For enhanced protection, the manufacturer has installed transient suppression diodes on the major inputs.
It is worth mentioning here that all the SMD components are situated on the bottom side. This ensures decreased shorting with the debris. Moreover, the stand-offs are pre-assembled to elevate all the contact points.
Additionally, the CNC xPRO v4 controller stepper driver has been designed to run G-code interpreter GRBL, ESTLcam control software, or can be programmed with an Arduino or AVR studio
It is evident that the CNC xPRO v4 controller stepper driver easily grabs the attention of modern craftsmen and woodworkers. Get one today and ensure that you maintain your craftsmanship with great efficiency.