Table Saw Fences in 2023

To add extra accuracy and safety to your table saw application, You should choose the table saw fence for your model. For professional workers, straight cuts are a must requirement in their projects. There is an array of different table saw fences available in the market, each having diverse specialities. If you are looking for a change in your existing table saw fence with something better and new, the below run-down of top 10 fence models will definitely guide you in the selection.

Plus, to ensure that you pick the suitable one for your job, a buyer’s guide is added further to assist you in decision making. 

Table Saw Fences

1. Vega U26 Table Saw Fence : Table Saw Fence Overall

Vega U26 Table Saw Fence

Vega U26 Table Fence is the most-sought high-end table saw fence currently ranking on the market. The fence system is designed to be compatible with a variety of table saws.

The package contains both rear and front railings for fence clamping. The rip size is 8 inches to the left side and 26 inches to the right of the saw blade. So, adequate space is available for making desired rips of any range.The U26 is a versatile option, however, for certain table saw models, you have to drill holes so that it properly fits your saw.

Other than that, the smooth cum sturdy fence slider makes the wood cutting easier and precise. The fins-adjustable knobs to get exact measurements and secure fence locking system, makes the cutting process easier than normal.

The fence, once locked in place, won’t budge even after multiple cuts without a break. 

Stability
94%
Accuracy
92%
Easy to Install
94%

*The above mentioned scores are out of 100

PROS

CONS

  • The main fence is made out of a strong metal

  • The whole table fence is easy to assemble

  • Vega is compatible with most table saws

  • Comes with just two brackets to hold the rail


2. Shop Fox W1410 Fence : Alternative to Vega U26 Fence

Shop Fox W1410 Fence

Having a high-end rip fence is necessary, but again, you can’t always expect to get the top-of-the-line fence models within your budget.

It might cost out of your budget compared to the ones generally available in the market. However, Shop Fox W1410 Fence is an exception here.

This standard railing system comes within your budget compared to its competitors. But, that does not reduce the usability of this fence to any extent. Shop Fox is a rugged cum secure unit that does not seem so cost-effective.To the right edge of the blade, the rip size ranges about 25 inches, you get enough space for cutting wooden boards of different sizes. The fence slider is so smooth due to the presence of the ball-bearings under it. Position adjusting knobs allow you dial to your preferred distance.

The clamps hold the fence tightly in place and it remains steady throughout multiple boards-cutting, at a stretch. board after board.

The product does not come with multiple predrilled holes. So, you have to drill new holes, as required, to fit on the saw table.

The fence is compatible with saw table sizing up to 27 inches. So, it is basically for the smaller wood projects, where a regular table saw is needed.

STABILITY 90%
ACCURACY 86%
EASY TO INSTALL 75%

*The above mentioned scores are out of 100

PROS

CONS

  • The fence is very precise and smooth

  • Installation doesn’t take time and is fairly easy

  • Locks in smoothly to ease your operations

  • Owner’s manual is complicated to understand


3. Shop Fox W2006 : for Professionals

Shop Fox W2006 Classic Fence with 7-Foot Rails and Legs

Shop Fox W2006 Classic Fence comes with 7 feet rails and legs. This model can accommodate wider varieties of tables saws.

Amazing rip capacity of 54 inches to the right of the saw blade and self-adhesive scale with a magnified cursor facilitates quicker cum precise fence adjustment.

W2006 is a perfect set for the pro-grade woodworkers, who look for highest rip capacity and do not think much about the expense. Also, the UPC coded product packaging keeps you safe from monetary fraudulence. The W2006 has a cam actuated lock handle and it fixes the fence against the rectangular tube of the front rail’s machined edge.

The lock pressure is adjustable, as required, with the help of two screws that come within the package. The legs attached to the railings give added strength and support to the fence.

Plus, you can include an extension table to the existing saw table (if required) for supporting bigger workpieces.

The HDPE (High Density Polyethylene Face) material built fence reduces for effortless material feeding and is also replaceable, in case the saw blade runs into one accidentally. This ergonomic lift-off model of W2006 fence makes its replacement and re-installation a cakewalk. In a nutshell, it is an amazing feature, especially when using fixtures and jigs or while doing cross-cuts using a miter gauge.

STABILITY 90%
ACCURACY 80%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • Comes with a lift off design that makes the fence removal and installation easy

  • The fence also has a cam action lock lever

  • Fine lined magnified cursor can be mounted on either side of the fence

  • The Support braces are cut too short and won’t reach between the leg and the rails.


4. Delta 36-T30T3 Table Saw Fence : Premium Pick

Delta 36-T30T3 Table Saw Fence

Delta 36-T30T3 Table Saw Fence is a super-quality, yet cost-effective fence model from Delta Power Equipment.

This option is mostly recommended to the occasional DIY crafters as the fence is used on the table sizing 27 inches. A little modification on the railing system would be required concerning the drilling of holes.

Thereby, your dedicated table saw model could perfectly fit on the Delta fence setup. Unlike the ordinary heavy fences, Delta fence is easy to move and once securely fixed in a position, the lock won’t give away even after cutting several boards at a stretch. The railing can be utilized on both sides of the saw blade, plus it has measuring tape along the entire table length.

If your table saw naturally fits this fence, it’s fine. Else, a pair of screws are available there to correctly adjust the fence in position. Lastly, the fence system is suitable on a variety of tables. 

STABILITY 96%
ACCURACY 94%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • Excellent and sturdy build quality

  • Comes with a 3 point locking system with twin hairlines systems

  • Fence securely clamps to front tube adding to versatility of the fence

  • May not fit all the saws


Other Great Picks

5. Shop Fox W2005 Table Saw Fence

Shop Fox W2005 Table Saw Fence

Shop Fox W2005 Table Saw Fence is an apt model for smoother wood cutting tasks. The ergonomic lift-off design with standard fence followed by high rip capacity makes the product fit for heavy wood cutting projects.

It is no doubt an expensive choice, however, the workability of this fence model is worth it.

The secure cam-lock system enables operation single-handedly. This dynamic railing system can be clamped on almost every table saw type.

It is a longer table fence sizing about 42 inches and so, is supported by tables of multiple sizes.After the fence installation, it allows a maximum rip capacity of about 25 inches to the right edge of the saw blade, perfect for cutting.

However, if you want some extra, look for a model with extended railing facility. The mounting holes may fit some saw models, while for others, additional drilling of holes might be required.

It varies from one saw type to another. Flawless fence packaging keeps Shop Fox at the top rank on the list. 

STABILITY 90%
ACCURACY 82%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • Solid build quality

  • One of the most accurate fences you will ever come across

  • Comes with single locking cam action similar to model W2006

  • You might need to do some tweaks to the set screws


6. DELTA BC30 30-Inch Fence

DELTA BC30 30-Inch Fence

Delta BC30 Fence is the one with rip capacity of about 30 inches to the right of the blade and 12 inches to its left. This Biesemeyer table fence is compatible with any sort of table saw.

The fence itself sizes around 42 inches; that’s an impressive length to work with the larger saw models. However, it works perfectly well with the other regular saws too. If you have no budget boundary, go for it. Being a Biesemeyer fence, you won’t have to replace the fence frequently. The sturdy steel built of the product followed by the plywood-based outer edges ensure maximum work potentiality and longevity. 

STABILITY 80%
ACCURACY 82%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • Comes with a 3 point locking system like other good quality table saw fences

  • The fence body is smooth when gliding

  • Comes with single locking cam action similar to model W2006

  • Holes aren’t lined up so you may have to drill your own


7. Shop Fox W1720 Aluma-Classic Fence

Shop Fox W1720 Aluma-Classic Fence

Shop Fox W1720 Aluma-Classic Fence includes 50 inches of rip capacity to the right side of the blade and includes 79 inches long railing system.

The part about this model is you won’t have to pay a big amount to purchase it. Luckily, the rails are backed by the additional leg stands.

The rails are comparatively delicate, so use them only if you make use of the full rip capacity (i.e. 50 inches). The W1720 is made from heavy-duty material which is suited by most of the table saws. The readings on the measuring scale can be seen through the magnified cursor placed above the scale to make precise fence adjustments.

The single-handed lock system makes the entire setup even simpler and quicker to cut. Just take care of the fence rails from breakage during the operation. Shop Fox W1720 Aluma-Classic Fence is one of the table saw fences for the money.

STABILITY 87%
ACCURACY 90%
EASY TO INSTALL 74%

*The above mentioned scores are out of 100

PROS

CONS

  • Very much affordable for the quality it provides

  • Fits most table saws comfortably

  • Has a wide right angle for precision and accuracy

  • Rails are bit too light


8. Carter Magfence II Universal Magnetic Fence

Carter Magfence II Universal Magnetic Fence

Carter Magfence II Universal Magnetic Fence is again a beginner-centric model. This product is a bit different. Unlike the other fence models on the list, Carter utilizes powerful magnets for holding the table fence in place.

The fence adheres to almost every metal surface (be it ferrous or non-ferrous), making the fence an ideal fit for the newbies.

The product is too easy to use. Simply mount it on the tabletop and clamp the fence at the correct position, magnetically. The fence is 3-½ inches by height and 16 inches by length, also, it includes multiple T-slots.

For the beginners, Carter is the quintessential option as you won’t have to do any fence adjustment or drill holes. Plus, the fence fits almost every tabletop. 

STABILITY 87%
ACCURACY 86%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • One of the few table saw fences that attaches magnetically

  • Both magnets are switchable which gives flexibility

  • Just two magnets, could provide two more magnets at the same price


9. Vega Pro 40 Table Saw Fence System

Vega Pro 40 Table Saw Fence System

Vega PRO 40 Table Saw Fence System is the last yet the choice for the tenderfoots. This model is constructed with durable, heavy-duty steel.

So, you are free from the worry of purchasing its replacement any sooner. With this fence installation, commercial wood projects and heavier material cutting become a cakewalk.

It can fit your existing table saw (of any type) of your woodshop. Plus, there is no need to drill new holes. The fence system is a rugged construction and is simple to set up.

The micro-adjustment feature followed by its ability to install varied accessories of table saw makes the model stand out from the rest. The measuring scales are already attached on the fence, allowing the user with a flawless cut every time. The fast and sturdy fence locking capacity adds to the pros of Vega Pro 40.

It not only increases your work potential and accuracy, but also improves user comfort while operating the saw.

You stay rest assured from any mishap as the fence won’t budge even after conducting a series of tasks successfully.

The brackets included in the fence system allow perfect adjustment of the jacking plates and thereby, keep the fence rails at the desired level.

The rip capacity of the fence bar is about 40 inches while placed to the right of the blade and 10 inches to the left side. 

STABILITY 80%
ACCURACY 87%
EASY TO INSTALL 80%

*The above mentioned scores are out of 100

PROS

CONS

  • Comes with adjustable mounting brackets making it easy to level and set the rails

  • Has a fence mounting system which allows full adjustment for accuracy

  • Comes with a cheap locking mechanism


Buyer’s Guide: Considerable Factors While Buying a Table Saw Fence

If you made it till here, it is time to check what makes the table saw fences comparable among one another, what is the factor one should look for and what not, etc. So, before you already stick to buying a particular fence model, check the following segment:

  1. Rip Capacity: The good thing about picking a table saw fence from the aftermarket is you can find the one with a rip capacity that accurately meets your requirements. Consider the average log size that you daily work on and choose the fence accordingly. Plus, make an account of the potential future tasks you may have to deal with, where higher rip capacities would be required. So, one-time purchase of the fence with maximum rip capacity would be a feasible solution to fit both your budget and work.
  1. Weight: A heavier table saw fence is generally difficult to slide with ease,  and might require putting much effort in the table management prior to performing a job. On the contrary, a lightweight fence represents its poor quality construction, where the fence has a high chance of getting shattered in the middle of its use. A feasible rule of thumb is to look for a fence model that weighs within the range of (30 to 50) pounds.
  1. Build Material: Always check for a sturdy model, made with robust material like Aluminium or Steel. Sometimes the perfect material selection determines the durability of the product. However, it won’t necessarily have to be a bulky one just because it is sturdy. There are hardy models that come with lightweight design. Hopefully, you will find one from the above list. Again, note that materials including wood, plastic or fiber, have higher susceptibility to breakage.
  1. Size of Table Saw: Different varieties of table saws are available in the market these days. Same is with their railing systems. While some saws tend to be versatile and fit almost every fence size, other saw models need much settings to be done on the saw railing. Make sure at what saw size a particular fence will fit the best. Some table saws can work with fence size as small as 27 inches, while others require a lengthy fence of about 42 inches, latching only in front and can fit a table of any level. However, not latching at the back does not prove it to be any less sturdy. 
  2. Easy to Install: The fence systems discussed above are ergonomically designed to be compatible with multiple table saw models. Here, some might require drilling additional holes to the rail (fence) system so that it fits the dedicated saw. As numerous varieties of table saws are budding everyday, it is harder for the fence manufacturer to take care of the whole spacings. You have to deal with that part, only if the fence model you bought is not particularly made for your table saw. While some fences are likely to line up properly with a fence as soon as unboxed, some require a bit modification. So, your fence selection should be such that it is easy to install through drilling a few newer holes (if needed) to fit your saw.

FAQs

What side should the fence be on a table saw?

Depends whether you are right handed or left handed. If you’re right handed, the fence should be right of the blade and if you are left then it should be on the left side of the blade.

Conclusion

A good quality fence is easily modifiable and installable. Plus, its light yet sturdy construction with higher rip capacity would deliver satisfactory work output. You can also check for some table saw fence clamps for better grip.After a diligent search and comparison among the above top 10 table saw fences, here we have our top picks: 

  • Vega U26 Table Fence is the most preferred cum versatile option on the list as it can accommodate varieties of table saws. Many other dynamic models are there above. However, its overall smooth cum sturdy fence slider, makes it an all-in-one package. Go for it if cost is not a deal-breaker for you.
  • Shop Fox W2005 Table Saw Fence is suitable for those looking for high rip capacity. Plus, its matchless product packaging ensures delivery without dispute. Perfect for the pro-grade woodcrafters.
  • Shop Fox W1720 Aluma-Classic Fence has an impressive rip capacity if that’s what you are looking for. However, the rails are prone to breakage. Otherwise, this product is a perfect pick for any heavy to regular woodworking projects.

The Edge Cutter is reader-supported website. When you buy through links on our website, we may earn an affiliate commission.

Leave a Comment